Often time, it is a challenge for installers to wrap areas under window molding in terms of the cutting, because it is very tempting for us to cut in the wrong place, which might lead...
Car wrap tips
When it comes to roof wrapping, there are times when installers accidentally cut directly on the paint or overstretch the film if not doing in a proper way. So today we will introduce you...
Often times, it gets very difficult for installers to wrap under the front or backlight on a vehicle, especially for color change (and particularly for light color vehicle), because as we cut the material...
We have had quite a few articles talking about how to wrap bumper well. However, there is a very crucial point to a successful finish, which is to see this giant bumper in sections...
There are always different kinds of challenges when it comes to color change wrapping: prepping, film stretching, cutting, angling… all kinds of “test” you have to go through. But today, we will be introducing you...
We are probably all familiar with standard relief cut if we have done wrapping once or twice at least. But is standard relief cut always the same? Today we will be looking at three types...
We have mentioned a lot of time that post-heating is extremely important for long term durability. But to post-heat well, surely we have some steps to go through. Today we will be giving some tips...
Often, most wrappers would want to wrap a little farther inside the edge of the surface, especially when we come across a vehicle which is a light color. However, it can always be tricky if...