Paint Protection Film
€525,00TeckWrap Clear TPU Paint Protection film is advanced film designed to achieve long term protection of vehicle surface.
Technical specification for PPF290
Protective film (μm) - 55
TPU film (μm) - 185
Release film (μm) - 90
Glue adhesion (gf/inch) - 525
Elongation % - 218
Breaking strength（kgf/inch) - 7.6
Chromaticity blackness (5pt) - 3.5
Flatness / Orange peel (5pt) - 3
Gloss (%,@60°) - 92.5
Anti-oil pen stain (Deli Marker pen, 5pt) - 5
Solvent resistance (Marker pen, 5pt) - 3.5
Solvent resistant corrosion (DMF) - 30
Resistance to scratching (5pt) - 4
Normal temperature scratch repair degree (1hr, 5pt) - 4.5
Normal temperature scratch repair degree (24hr, 5pt) - 4.5 (90%)
Heating scratches completely repair ability (70℃, 5pt) - 4.5
The adhesive has a viscous force of 222 gf/inch (at temperature of 24 ° C, and a humidity of 54%)
Physical properties
Size: 1.52m x 15m (59.8" x 590.6", 4.98ft x 49.2ft, 1.66yd x 16.4yd)
Storage temperature: +14C - +20C with 50% relative humidity
Shelf-life: 1 year from production date (save LOT number)
Application: on a wet surface
Warranty: 3 years from production date. The product is warranted to be free of defects in the material. In case of product defects communicated in the mentioned period, TeckWrap will consider and determine the existence of the defect and further decide at its sole discretion to either replace the defective product without charge or compensate it with money in such amount, as TeckWrap deems reasonable.
Top coating features: solvent and stain resistance, resistance to heavy metals, resistance to scratches, self-healing
Click the link for Installation guide
The technical specification for PPF290C
*Self-Healing ★★★★
*Anti-Yellowing ★★★★
*Durability ★★★★★
|
|
Test Method Units Typical Properties |
|
● Topcoat Thickness |
10 μm±1 |
|
● TPU Thickness |
135 μm±3 |
|
● Taber abrasion |
ASTM D-1044 1000g weight <3.5g |
|
● Gloss value |
OTM-3-309 >80 |
|
● Surface Haze |
ASTM D-1003 % <1 |
|
● Tensile Strength |
D-412 psi 5000 mpa 4.47 |
|
● Elongation at Break |
D-412 % 550 |
|
● 5% Acid 5% NaOH 100% Alcohol Gasoline Boiling water resistance |
24h check No change |
|
● Heating resistance |
80℃ 2h -20℃ 2h 10 cycle test No change |
|
● Outdoor Weathering |
TEST 1 3000hours No change TEST 2 1000h0urs No change |
|
TEST 1. QUV using UVA bulb, 4 hours 50℃ UV exposure, 4 hours 60℃ condensation TEST 2. 6500W Xenon Arc, Irradiance: 0.51 W/m2(340 nm), 65℃. Humidity 50% R.H. |
|
Adhesive: high-performance acrylic, non-yellowing
Adhesive thickness: 35μm±2
Peel on glass at 180(kg/25mm):
20 minutes after application 1.2 kg/25mm
24 hours after application 1.5 kg/25mm
